loading
reading
writing
saving
searching
68 cm Norco Road 6'3" to 6'6" - $360 (North Shore)
QR Code Link to This Post
Fits rider 6'3" to 6'6"
68cm / 26.5 in Norco Road. Tange Champion #5 chrome molybdenum tubing.
Very little use, just had complete overhaul service;
-Bottom Bracket cleaned new bearings and Park grease
-Front Axle cleaned new bearings and Park
-Rear axle cleaned new bearings and Park.
-Brakes cleaned and lubed all pivot points, spring tethers, barrel adjustors, set tension, deglaze pads, set toe in, balance, cables remove, apply fine oil into cable housing, set tension on cable.
-Pedals remove, regrease post, pull seal away, apply heavy oil, reseat seal
-Derailleurs clean and oil all pivots, set limit screws
-Shifters loosen, apply oil on pivots only, set tension
-Headset clean port, apply heavy oil 6 drops ea, check and set headset, grease stem and steering post
-Seat tube, debur, regrease seat post and seat tube
-Chain check for stretch, found none, lubed
-Wheels see notes in pics
Got the usual equipment for this era, * it's got the Maeda "Perfect" freewheel
11:00am to 2:00 pm weekends, with couple days notice
$360 obo
Key Words; Tange Industries Champion #5 chrome molybdenum steel, straight frame no dents, no cracks, very few minor scratches, large, extra large, 6'3", 6'4", 6'5", 6'6",tall, very tall, large, ex large, extra large, Extra large, Ex Large, Large road, large road
*overhaul ; remove existing bearings, clean all bearing contact points (races), install Park grease and new bearings, set bearing tension