loading
reading
writing
saving
searching
RODE Microphone D-Power Plug Pre-Amplifier (New) - $99
QR Code Link to This Post
RODE Microphone D-Power Plug Pre-Amplifier (New)
E-Transfers Accepted.
A 'Turbo Charger' for Dynamic Microphones!
Using conventional microphones with long multi-core cables results in a dramatic loss of signal strength, and sound quality due to cable resistance and capacitance. Rode's D-Power Plug is as close as you can come to having a 'Turbo Charger' for Dynamic microphones! Featuring a precision instrumentation grade pre-amplifier circuit, D-Power Plug will turn any standard dynamic microphone into a high-gain, electronically balanced output device. Powered by standard 48-volt phantom power, D-Power Plug can drive cables in excess of 100 m with negligible loss of signal quality or power.
Rode D-Power Plug Features:
Instrumentation grade pre-amplifier.
Balanced input and balanced output.
Minimum losses over long cable runs.
P48V phantom powered.
Gain: +20 dB.
Input Level (nominal): 1 mV.
Output Level (nominal): 10 mV.
Frequency Response: 20 Hz~20 kHz (-3 dB)
Input impedance: 100 kΩ balanced/arm.
Output Impedence: 100 Ω balanced.
Noise: -116 dB A-Wt RTI.
Max. Input: 0.8 Vp-p.
Max. Output: +11.4 dBu @ 1% THD (8 Vp-p).
Input Connector: XLR 3 PIN Female.
Output Connector: XLR 3 PIN Male.
Pin Assignment: Pin 1 GND,
Pin 2 Signal (+),
Pin 3 Signal (-).
Current Consumption: 3 mA @ 48V.
Weight approx.: 73.8 grm